Essential Spare Parts for GE Brivo MR355 MRI Systems
The GE Brivo MR355 is a widely trusted 1.5T MRI system known for its balance between affordability and clinical performance. Built for routine imaging and small to medium-sized healthcare facilities, the MR355 provides dependable diagnostic results while maintaining a compact footprint. To ensure this system continues to operate efficiently, sourcing and maintaining high-quality GE Brivo MR355 MRI machine parts is essential.
Why Parts Matter for the GE Brivo MR355
Like all advanced imaging systems, the Brivo MR355 relies on a wide array of electronic, mechanical, and RF components working in harmony. From coils and gradient amplifiers to power supplies, interface boards, and patient tables, each part contributes to the system's uptime and image quality.
When a component fails or becomes worn, replacing it with a compatible and reliable part is key to minimizing downtime and preventing diagnostic delays. Investing in quality-assured parts not only extends the system’s lifespan but also optimizes clinical throughput.
Commonly Replaced Parts for the Brivo MR355
RF Coils: Anterior, posterior, and specialty coils tailored for neuro, spine, and body imaging.
Gradient Amplifiers: Crucial for maintaining high-speed, high-resolution scans.
System Interface Modules: Including boards for gantry control, patient interface, and RF chain connectivity.
Patient Table Components: Motors, hydraulic lift systems, and mechanical drive parts.
Magnet Cooling Components: Helium compressors, cold heads, and related cryogenic parts.
Power Supply Units: High-voltage and low-voltage PSUs that power the system’s electronics.
Brivo MR355 MRI Spare List
| Title | Part Number | Title | Part Number |
|---|---|---|---|
| 2317115-10-1.5T 8 CHANNEL NV ARRAY LATCH KIT | P/N: 2317115-10 | 2423192-Head Neck Unit 1.5T Brain Spine | P/N: 2423192 |
| 5114356-15-1.5T 8 Channel Transmit Receive Knee Array Cable | P/N: 5114356-15 | 5895895-HEAD NECK UNIT CABLE ASSEMBLY | P/N: 5895895 |
| 5114356-3-1.5T 8 Channel Transmit Receive Knee Array Cable | P/N: 5114356-3 | 5250066-51-Interface and Remote Functions Version 3 – RoHS | P/N: 5250066-51 |
| 5433103-1.5T Express Coil – 9E Anterior Array Kit | P/N: 5433103 | 5250066-IRF3 BOARD | P/N: 5250066 |
| 5147135-3-1.5T HD 8 CH NV ARRAY CABLE | P/N: 5147135-3 | 5342679-Large Cylindrical Unified Phantom, LARGE CYLINDRICAL UNIFIED PHANTOM | P/N: 5342679 |
| 6613300-20-1TB SATA 7200RPM HDD | P/N: 6613300-20 | LCD2490 WUXI2-BK-LCD Monitor Screen | P/N: LCD2490 WUXI2-BK |
| 6613300-19-1TB SATA 7200RPM HDD | P/N: 6613300-19 | 5458804-Low Height Table Control Box Assembly | P/N: 5458804 |
| 46-281101P8 – Vent Adapter O-ring | P/N: 46-281101P8 | 5777777-Low Hight Fixed Table 160kg weight limitation | P/N: 5777777 |
| 6613300-21-5.25 DVD -R-RW-ROM, CD-R-RW-ROM MULTI | P/N: 6613300-21 | 5332027-4-Lytron Chiller | P/N: 5332027-4 |
| 5271265-5-8 Channel Shoulder Coil Phantom Holder Assembly | P/N: 5271265-5 | LCS7594G1-Lytron Chiller | P/N: LCS7594G1 |
| 5334591-8Ch Head Neck Array Coil Introduction | P/N: 5334591 | 5771373-Magnet Monitor 4 | P/N: 5771373 |
| NC008901-8Ch Receive Only Shoulder Coil | P/N: NC008901 | 46-281101P1-Magnetic Resonance Imaging | P/N: 46-281101P1 |
| 5332026-3-8KW LYTRON LCS | P/N: 5332026-3 | 5330100-MM3 | P/N: 5330100 |
| 5332026-8KW LYTRON LCS | P/N: 5332026 | 2125247-13-MOLDED SPT NESTING PLATE | P/N: 2125247-13 |
| 5438959-A3 Sumitomo Cold | P/N: 5438959 | 2222564-25-Motor , ½ HP 115/230V | P/N: 2222564-25 |
| 5814003-A4 FRU Kit, Sumitomo Cold Head and Gasket | P/N: 5814003 | 5393370-3-MR SCIM-Black with English Overlay RoHS | P/N: 5393370-3 |
| 5429039-40-Advantage Workstation (AW) Monitor MX193 | P/N: 5429039-40 | 5114356-5-Operator Manual | P/N: 5114356-5 |
| 5155291-Aluminum Platform Ladder, 47.5 inches (1,206.5 mm) | P/N: 5155291 | 5341318-2-PAC5 for 750W | P/N: 5341318-2 |
| 5114356-10-Ankle Pad | P/N: 5114356-10 | 5114356-12-Phantom Positioner | P/N: 5114356-12 |
| 5429039-70-AW MX193 standard Eizo Monitor FRU | P/N: 5429039-70 | 5346240-PRE-AMP BOARD | P/N: 5346240 |
| 212119-12-Blower Cabinet | P/N: 212119-12 | 5196918-2-Primary magnet MRU2006 | P/N: 5196918-2 |
| 5372731-Coil GEM PVA | P/N: 5372731 | 2222564-29-Pump Assembly for Chiller | P/N: 2222564-29 |
| 2162680-Cold Head and Gasket Kit | P/N: 2162680 | 2222564-24-Pump Assembly for Chiller | P/N: 2222564-24 |
| 2194003-Cold Head and Gasket Kit | P/N: 2194003 | 5114356-9-Ramp Pad | P/N: 5114356-9 |
| 5367749-100-Cradle Assembly with Phased Array Coil Kit – RoHS | P/N: 5367749-100 | 5436428-100-Rear End Bell Assembly for 16 Beat – RoHS | P/N: 5436428-100 |
| 5367749-200-Cradle Assy with PA Coil FRU Kit | P/N: 5367749-200 | 2349529-RUPTURE DISK | P/N: 2349529 |
| 5367749-Cradle Assy with PA Coil FRU Kit | P/N: 5367749 | 5114356-6-Service Manual | P/N: 5114356-6 |
| 5342681-CUBICAL UNIFIED PHANTOM | P/N: 5342681 | 2319156-Service Platform HD | P/N: 2319156 |
| 5420624-DC Cable Clamp FRU kit (Cable Clamp Assy | P/N: 5420624 | 2133388-SPT PHANTOM CART KIT SPLIT HEADCOIL | P/N: 2133388 |
| 2178874-Dock Clamp Plate | P/N: 2178874 | 2280951-SRF-TRF Circuit Board Assembly | P/N: 2280951 |
| 5134465-Dock Limit Switch Board | P/N: 5134465 | 2280952-2-STIF | P/N: 2280952-2 |
| 5138526-Driver Module Lite | P/N: 5138526 | 2172241-Sumitomo Adsorber | P/N: 2172241 |
| 5138526-3-Driver Module Lite3 for Bamboo | P/N: 5138526-3 | CSA-71A-Sumitomo Air Cooled Compressor – CSA-71A | P/N: CSA-71A |
| 5341543-2-Extreme Fidelity Driver – Power Supply with Packing | P/N: 5341543-2 | 5330743-Sumitomo Air Cooled Compressor – CSA-71A | P/N: 5330743 |
| 5435920-Foot Ankle Coil | P/N: 5435920 | 5346918-SV EM Embedded PA coil Convert Brd3 | P/N: 5346918 |
| 5332131-FRONT LEAK SENSOR (2-A) | P/N: 5332131 | 5333181-SV front bridge assy | P/N: 5333181 |
| 5746587-FRU, 16BEAT AA Coil | P/N: 5746587 | 6613300-SV HOST PC | P/N: 6613300 |
| 5746251-FRU, SILENT HNU 5746251 | P/N: 5746251 | 5364447-SV MCS FRU kit | P/N: 5364447 |
| 6237000-GP4 | P/N: 6237000 | 5114356-8-Thick Knee Pad | P/N: 5114356-8 |
| 5341543-51-Gradient power supply | P/N: 5341543-51 | 5114356-7-Thin Knee Pad | P/N: 5114356-7 |
| 46-271410G1-GRAFIDY2 PHANTOM HOLDER BASE PLATE | P/N: 46-271410G1 | 5340354-XFA Control Board Assembly | P/N: 5340354 |
| 5273235-5-HD 8CH FAC PHANTOM ASSEMBLY | P/N: 5273235-5 | 5341541-XFA Water Cooled Gradient | P/N: 5341541 |
| 5406395-2-HD 8Ch Wrist Array | P/N: 5406395-2 | 5341541-2-XFA with FRU packing | P/N: 5341541-2 |
| 5138526-2-HDSV Driver MODULE-16 Channel | P/N: 5138526-2 | 5341541-52-XFA WITH FRU PACKING, ROHS | P/N: 5341541-52 |
| 5480028-HDV 1.5T Narrow-Band Exciter and Reference Clock Assembly | P/N: 5480028 | 5341541-51-XFA WITH FRU PACKING, ROHS | P/N: 5341541-51 |
| 5154662-HDv 1.5T Reference Clock and Narrow Band Exciter Module | P/N: 5154662 | 5341543-52-XFD-Power Supply – RoHS | P/N: 5341543-52 |
Benefits of Choosing Refurbished or Tested Used Parts
Many healthcare facilities prefer to purchase tested used or refurbished GE Brivo MR355 parts due to their cost-efficiency without compromising performance. These parts are often sourced from functioning systems, thoroughly inspected, and tested under real-world load conditions. Reputable suppliers typically offer warranty options, technical support, and system compatibility checks.
Ensuring Compatibility and Performance
When selecting parts for your Brivo MR355 system, it is crucial to:
Verify part numbers (P/N) and system compatibility.
Work with suppliers who offer documentation and support.
Choose parts tested in a working MRI environment.
Ensure availability of installation and calibration support if needed.
Final Thoughts
Maintaining a GE Brivo MR355 MRI machine with quality replacement parts is an investment in reliable imaging performance and long-term system value. Whether for routine maintenance or urgent repair, having access to the right parts can significantly improve uptime and patient care outcomes.
For healthcare providers aiming to reduce costs without compromising image quality, selecting well-tested and compatible GE Brivo MR355 MRI parts is a practical and strategic choice.
Essential Spare Parts for GE Brivo MR355 MRI Systems
GE Revolution ACT Veterinary CT Scanner: Advanced Imaging & Spare Parts Overview
